| ||||
 Factory-Reconditioned Bostitch U/BT200K-2 5/8- to 2-inch 18-gauge Brad NailerBest Price: $32.17 Didn't want to spend too much since only wanted it for putting in base moldings, but ended up... |  Factory-Reconditioned Bostitch U/RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing NailerBest Price: $155.99 Saved me a bunch of time, that's for sure. Works well -- occasionally will drive a nail... |  Bostitch FLN200 2-inch Flooring L-Nail (1,000 per Box)Best Price: $6.60 I used these nails to install 3/4" maple & brazilian cherry hardwood floors at my... |  Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring NailerBest Price: $418.12 This has came in very handy for putting down our floors. One room done so far and 3 to go, plus... |  Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish NailerBest Price: $115.74 Stapler has worked flawlessly thus far. Using it to install Hardiplank. Easy to load and to use.... |
 Stanley 84-114 3 Piece Basic 6-Inch Slip Joint, 6-Inch Long Nose, and 6-Inch Diagonal Plier SetBest Price: $11.99 My daughter just bought a new home and am helping her start her own collection of tools. This... |  Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin NailerBest Price: $100.51 Used this to attach the trim and door stops when installing the interior doors of my house. It... |  Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium HousingBest Price: $243.28 I bought this nailer specifically to use the Hurriquake nails on earthquake reinforcement... |  Stanley Bostitch AntiJam Standard Booklet Stapler, 20 Sheet Capacity (B440SB)Best Price: $24.95 The "Stanley Bostitch Standard Booklet Stapler" is a very solid (read heavy) saddle... |  Bostitch PN100K Impact Nailer KitBest Price: $82.44 I took a chance and bought this product, mainly because it got some good reviews. My review... |
 Factory-Reconditioned Bostitch U/F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium HousingBest Price: $139.99 This showed up on time, is in good shape and drove 3 1/2" nails with no problems. |  Stanley Bostitch Premium Quality Heavy Duty Staples for PHD-60 Stapler, 5,000 Count Box (SB35PHD-5M)Best Price: $6.99 These staples are oversized for just a few pages. Better to use a micro-stapler. However, they... |  Factory-Reconditioned Bostitch U/N62FNK-2 1- to 2-1/2-inch 15-gauge Angled Finish NailerBest Price: $93.00 I bought this nail gun for set building, and it has fired a thousand nails so far with out fail.... |  Bostitch PT-2330-3M 1-3/16-Inch 23 Gauge Pin (3000 per Box)Best Price: $7.19 As the pins go,there is no issue. The other reviewer is referring to the tool from Bostitch, the... |  Bostitch FLN150 1-1/2-Inch Flooring L-Nails (1,000 per Box)Best Price: $19.59 The product was what it was supposed to be, but by the time the product got here, I had to go... |
 Bostitch N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Magnesium HousingBest Price: $267.95 Great nailer, no major problems. One or two jams during the whole house project but nothing to... |  Factory-Reconditioned Bostitch U/MIIIFS 1-1/2-inch to 2-inch Pneumatic Flooring StaplerBest Price: $281.80 I have to start by saying...if a product is available reconditioned, I'm all for it. I'm an... |  Bostitch PT-2325-3M 1-Inch 23 Gauge Headless Pin (3000 per Box)Best Price: $7.80 If you do trim work, or work with very thin wood...you need to go to these headless pin... |  Bostitch PT-2319-3M 3/4-Inch 23 Gauge Pin (3000 per Box)Best Price: $5.99 Shipping was a little slow, but thats alright. Pin nails fit and work fine. Thanks |  Bostitch VSA4 Vinyl Siding Adaptor KitBest Price: $21.99 This part works well for what its for. It is basically a replacement end for the RN46 that has... |
 Bostitch RN46-1 3/4-Inch to 1-3/4-Inch Coil Roofing NailerBest Price: $239.95 There isn't much to write. I have received the product to do a roofing job that is scheduled,... |  Bostitch LHF97125-2 Floor Runner Laminated Hardwood Flooring Stapler for 1/4-inch to 1/2-inch FlooringBest Price: $234.95 I bought this after giving up being on a waiting list two weeks to rent one from a local... |  Bostitch TVA6 Trigger Valve KitBest Price: Calculated in a shopping cart Item came quickly and was exactly what was needed to fix Bostitch gun which, by the way, are... |  Bostitch RH-MC14815GAL-S Thickcoat Round Head 1-1/2-Inch-by-.148-Inch-by-21-Degree Plastic Collated Metal Connector Nail (1,000 per Box)Best Price: $40.09 Received these nails 8 days after ordering using the free shipping, and in perfect condition |  Bostitch SB-CAPS 1,000 CapsBest Price: $10.20 If you are a "do-it-yourselfer" either by choice or because you are "on your own... |
 Bostitch CR3DGAL 1-1/4-Inch Smooth Shank 15 Inch Coil Roofing Nails, 7,200-Qty.Best Price: $38.45 Stanley Bostitch CR3DGAL Galvanized Coil Roofing Nails I purchased these nails for my Hilti... |  Bostitch RH-S16D131EP Round Head 3-1/2-Inch-by-.131-Inch-by-21-Degree Plastic Collated Framing Nail (4,000 per Box)Best Price: $74.57 I received the nail strips loose in a box without any packing. The remnants of the original... |  Bostitch SB16-2.00-1M 2-Inch by 16 Gauge Bright Finish Nail (1,000 per Box)Best Price: $7.88 Not much to say about the nails - They are exactly as described and fit my Bostitch nailer. ... |  Bostitch MIIIFS 1-1/2-Inch to 2-Inch Pneumatic Floor StaplerBest Price: $341.92 The pneumatic floor stapler worked great. Very heavy duty, solid, did not have any problems... |  Bostitch C6R90BDG Thickcoat 2-Inch by .090-Inch Ring Shank by 15 Degree Coil Siding Nail (3,600 per Box)Best Price: $56.14 These nails fit and work perfectly in my nail gun, which happens to require nails that neither... |
 Bostitch SX50351-1/2G 1-1/2-Inch by 18 Gauge by 7/32-Inch Crown Finish Staple (3,000 per Box)Best Price: $24.13 Bostitch staples for my staple gun cost about $.01 a piece. I found I can get the same level of... |  Bostitch SX50351G 1-Inch by 18 Gauge by 7/32-Inch crown Finish Staple (5,000 per Box)Best Price: $24.59 5,000 Pack, 7/32" Crown, 1" Narrow Galvanized Staple, Fits Bostitch #S32SX, True Value... |  Bostitch PT-2312-3M 1/2-Inch 23-Gauge Headless Pin, 3,000-PackBest Price: $5.30 My husband had me order these for his Bostich nail gun. They are a great price. He is pleased... |  Bostitch N88RH-2MCN Industrial High-Powered Round Head Framing Nailer and Metal ConnectorBest Price: $195.99 We have used the N88RH for nearly two years for residential renovation and new construction. The... |  Bostitch MFN200 Manual Flooring Cleat NailerBest Price: $162.95 Purchased the refurbished nailer and everything looked new right out of the box. Have several... |
 Bostitch BT1309B 1-Inch 18-Gauge Brads, 3,000-Qty.Best Price: $5.70 3000 Pack, 1" Galvanized Brad, Fits Most 18 Gauge Brad Nailers. |  Stanley-Bostitch Trigger Valve N88 N62Fn N80Sb TVA11Best Price: $20.88 Quick and easy to replace. If you are dependent on your nail gun, you should keep one of these... |  Factory-Reconditioned Bostitch U/F21PL Round Head 1-1/2-inch to 2-1/2-inch Framing Nailer includes Postiive Placement TipBest Price: $151.35 I love this nail gun it is everything I need in a framing nail gun |  Bostitch SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad NailerBest Price: $89.98 Unlike all the other reviews my experience is better with the 2 in 1 cause unlike the rest of u... |  Bostitch SX50353/4G 3/4-Inch by 18 Gauge by 7/32-Inch crown Finish Staple (5,000 per Box)Best Price: $18.76 3/4" Galvanized Finish Staples. Fits Bostitch #S32SX, True Value #703077, #SB-150SX, True... |
 Bostitch PRO-1450 ProzHoze 1/4-Inch x 50 Premium Polyurethane Air HoseBest Price: $26.89 I am in the process of replacing all my old rubber and Pvc hoses with Poly hoses and I recently... |  Stanley GR25 Trigger Feed Dual Melt Glue GunBest Price: $7.69 I use this just occasionally. Didn't use it for a long time, and it seems that the glue has... |  Stanley Bostitch AntiJam Standard Plier Stapler, 20 Sheet Capacity (SSP-99)Best Price: $14.00 I love this stapler. It is the best and most dependable stapler I have ever owned. I have now... |  Bostitch C3R80BDG Thickcoat Round Head 1-1/4-Inch by .080-Inch by 15 Degree Wire Collated Ring Shank Coil Siding Nail (4,200 per Box)Best Price: $63.85 GALV-A-TECH" COIL SIDING NAILS 1-1/4" length 15 degree Wire collated Fits Bostitch... |  Bostitch BT1340B 1-9/16-Inch 18 Gauge Brad Nails (2,000 per Box)Best Price: $4.97 2000 Pack, 18 Gauge 1-9/16" Galvanized Brad Nail, Fits Most 18 Gauge Brad Nailers. |
 Bostitch RH-MC13115GAL-S Thickcoat 1-1/2-Inch by .131-Inch by 21 Degree Plastic Collated Positive Placement Nail (1,000 per Box)Best Price: $33.13 I ordered the nails three months before I finally received them. During the wait for shipping I... |  Factory-Reconditioned Bostitch U/SX150K-1 1/2-inch to 1-1/2-inch 18 Gauge Narrow Crown Stapler with Magnesium HousingBest Price: $54.00 This arrived in bad shape, looked as if it had just been used, had dirt in it, very... |  Stanley Bostitch 3-Hole Adjustable Hole Punch with Swivel Handle, 20 Sheet Capacity, Black (HPK3-ADJ)Best Price: $10.00 Hole punch designed with everybody in mind. Handle swivels for right handed or left handed... |  Bostitch SL50351G 1-Inch by 5/16-Inch 18-Gauge Staple (5,000 per Box)Best Price: $19.16 5,000 Count, Bostitch, 1", Cap Staples, Box, To Be Used In Bostitch Cap Stapler, SB150SlBC-1. |  Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium HousingBest Price: $244.75 This is a great gun! I've used it for lots of stuff like building a shed, repairs and new... |
 Stanley Bostitch Contemporary Full Strip Stapler (B2200BK)Best Price: $4.00 This stapler is great. It works very well and staples many papers together. If you take the top... |  Factory-Reconditioned Bostitch U/SB150SLBC-1 3/4-inch to 1-1/2-inch Cap StaplerBest Price: $147.28 This is an awesome tool for anybody in construction. It saves 10 times the time compared to... |  Bostitch PN100 Palm Impact NailerBest Price: $49.99 This tool is a great value and works extremely well in tight places. I also used it to nail all... |  Bostitch SB16-1.25-1M 1-1/4-Inch by 16 Gauge Bright Finish Nail (1,000 per Box)Best Price: $6.44 2,500 Pack, 1-1/4" 16 Gauge, Flat Angle Finish Nail, Engineered To Fit Bostitch Model... |  Bostitch SX150K-1 18 Gauge 1/2-Inch to 1-1/2-Inch Narrow Crown StaplerBest Price: $98.00 I bought a refurbished SX150K for 1/2 the price and IT WAS NEW NOT A MARK ON IT!!! The first... |
 Bostitch BCS1516 15-1/2 Gauge 2-Inch Hardwood Flooring Staple (7,720 per box)Best Price: $58.99 These were not coated as stated in the description. They were galvanized, but did not have the... |  Bostitch SB150SLBC-1 3/4-Inch to 1-1/2-Inch Cap Stapler KitBest Price: $217.95 This is a solid tool. I have had a Bostitch framing nailer for years and it has always been... | |||
See also for All Bostitch